Markusbloch: /* Firmware upgrade */

2013-05-11T15:01:29Z

Firmware upgrade

← Nächstältere Version		Version vom 11. Mai 2013, 17:01 Uhr
Zeile 28:		Zeile 28:

	<nowiki>http://www.qnap.com/download.asp</nowiki>		<nowiki>http://www.qnap.com/download.asp</nowiki>
	[[File:~~/w/images/thumb/a/a5/Qnap0.png/100px-~~Qnap0.png\|~~100px~~\|~~link=/wiki/Datei:Qnap0.png~~\|~~alt=~~]]~~<a href="/wiki/Datei:Qnap0.png" class="internal" title="vergrößern"><img src="/w/skins/common/images/magnify-clip.png" width="15" height="11" alt="" /></a>~~		[[File:Qnap0.png\|200px\|right\|thumb]]
	~~alt text~~


Zeile 39:		Zeile 38:

	4: Save to file on your local PC		4: Save to file on your local PC




	[[File:/w/images/thumb/e/eb/Qnap1.png/100px-Qnap1.png\|100px\|link=/wiki/Datei:Qnap1.png\|alt=]]<a href="/wiki/Datei:Qnap1.png" class="internal" title="vergrößern"><img src="/w/skins/common/images/magnify-clip.png" width="15" height="11" alt="" /></a>
	~~alt text~~


	5: Unzip the '''compressed file'''to an '''winzip file'''		5: Unzip the '''compressed file'''to an '''winzip file'''

Markusbloch: /* Check the actual driver is attached */

2013-05-11T14:59:06Z

Check the actual driver is attached

← Nächstältere Version		Version vom 11. Mai 2013, 16:59 Uhr
Zeile 346:		Zeile 346:

	=== Check the actual driver is attached ===		=== Check the actual driver is attached ===
	<pre>[~] # Type: cat /proc/bus/usb/devices~~</nowiki>~~		<pre>[~] # Type: cat /proc/bus/usb/devices
	T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0		T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
	D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1		D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1

Markusbloch: /* Check the actual driver is attached */

2013-05-11T14:58:52Z

Check the actual driver is attached

← Nächstältere Version		Version vom 11. Mai 2013, 16:58 Uhr
Zeile 346:		Zeile 346:

	=== Check the actual driver is attached ===		=== Check the actual driver is attached ===
	<~~nowiki~~>[~] # Type: cat /proc/bus/usb/devices</nowiki>		<pre>[~] # Type: cat /proc/bus/usb/devices</nowiki>
	T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0		T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
	D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1		D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
Zeile 362:		Zeile 362:
	[~] # Type: lsmod		[~] # Type: lsmod
	[~] # Type: dmesg \| grep pl2303		[~] # Type: dmesg \| grep pl2303
	~~<~~/pre~~>~~		</pre>

	=== Check the driver ===		=== Check the driver ===

Markusbloch: /* Check the actual driver status */

2013-05-11T14:58:30Z

Check the actual driver status

← Nächstältere Version		Version vom 11. Mai 2013, 16:58 Uhr
Zeile 305:		Zeile 305:
	=== Check the actual driver status ===		=== Check the actual driver status ===
	<nowiki>[~] # Type: cat /proc/bus/usb/devices</nowiki>		<nowiki>[~] # Type: cat /proc/bus/usb/devices</nowiki>

	The responce of the sysem will be something like this		The responce of the sysem will be something like this
			<pre>
	T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0		T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
	D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1		D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
Zeile 317:		Zeile 318:
	E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms		E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
	E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms		E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
			</pre>

	The Driver=none indicates that there is no driver attached		The Driver=none indicates that there is no driver attached

	# <~~nowiki~~>!/bin/sh ~~</nowiki>~~		<pre>
			#!/bin/sh

	ln -s /opt/lib/modules/2.6.12.6-arm1/kernel /lib/modules		ln -s /opt/lib/modules/2.6.12.6-arm1/kernel /lib/modules
Zeile 338:		Zeile 341:
	[~] # Type: ll		[~] # Type: ll
	[~] # type: insmod pl2303.ko		[~] # type: insmod pl2303.ko
			</pre>

			[[Kategorie:HOWTOS]]

	=== Check the actual driver is attached ===		=== Check the actual driver is attached ===

Markusbloch: /* Reboot und Test */

2013-05-11T14:55:39Z

Reboot und Test

← Nächstältere Version		Version vom 11. Mai 2013, 16:55 Uhr
Zeile 366:		Zeile 366:

	www.asmlonline.com >> asmlonline@hotmail.com		www.asmlonline.com >> asmlonline@hotmail.com

			[[Kategorie:HOWTOS]]

Generix: Die Seite wurde neu angelegt: „Cleanup Qnap This is an simple sequence for starting all over with an qnap TS-219 after having played with an TS-219 for some time. In this time we have probl…“

2013-05-10T20:31:13Z

Die Seite wurde neu angelegt: „Cleanup Qnap This is an simple sequence for starting all over with an qnap TS-219 after having played with an TS-219 for some time. In this time we have probl…“

Neue Seite

Cleanup Qnap

This is an simple sequence for starting all over with an qnap TS-219 after
having played with an TS-219 for some time.
In this time we have problably damaged many parts and settings and it is
better to have an nice blank system again

'''Features'''
* Reset to factory settings

* Create Basic configuration.

* Clean up the HD

* Install mail

* Install perl

'''Note'''
* There is also a <nowiki>[http://forum.qnap.com/viewtopic.php?f=182&t=61052 step-by-step-description]</nowiki> for a TS109

== Firmware upgrade ==
Download the latest firmware from the qnap distribution

<nowiki>http://www.qnap.com/download.asp</nowiki>
[[File:/w/images/thumb/a/a5/Qnap0.png/100px-Qnap0.png|100px|link=/wiki/Datei:Qnap0.png|alt=]]<a href="/wiki/Datei:Qnap0.png" class="internal" title="vergrößern"><img src="/w/skins/common/images/magnify-clip.png" width="15" height="11" alt="" /></a>
alt text

1: Select: storage (qnap1)

2: Select: modelname

3: Select the tab >> Firmware

4: Save to file on your local PC

[[File:/w/images/thumb/e/eb/Qnap1.png/100px-Qnap1.png|100px|link=/wiki/Datei:Qnap1.png|alt=]]<a href="/wiki/Datei:Qnap1.png" class="internal" title="vergrößern"><img src="/w/skins/common/images/magnify-clip.png" width="15" height="11" alt="" /></a>
alt text

5: Unzip the '''compressed file'''to an '''winzip file'''

== Reset to default factory constants ==
log into the qnap

select reset to default factory settings

select Firmware update (QNAP3)

select browse-key to select your downloaded firmware version

select start

== Update your Basic server setting ==
Change name to FaserTaiwan

change admin passw: xxxxxxxx

create xxxx passw: xxxxxxxx

enable web Server

enable NSF

enable Mail

<nowiki>SMTP Server: smtp.gmail.com</nowiki>
<nowiki>Port Number: 587</nowiki>
<nowiki>sender: ACE External services</nowiki>
<nowiki>user Name: your.services@gmail.com</nowiki>
<nowiki>passw: xxxxxxxxx</nowiki>

== Install Optware ==
Select Get QPKG (QNAP4) version 0.99.163

save the file to your local pc

unzip the file (qnap5)

select tab Installation

select browse

press install

The pinguin should be visable (qnap6)

Click on the IPKG image and select Enable (qnap8)

Restart the qnap

== Enable perl scripting ==
to enable p-l files we have to change the apache configuration

'''/mnt/HDA_ROOT/.config/apache/apache.conf '''
This will force the .pl files to be executed as an cgi

If you run an .pl file, and you get the save dialog... look here

<nowiki>get Filezilla to log into your qnap</nowiki>
add this to the apache configuration

<nowiki><Directory "/share/Qweb/cgi-bin">
AllowOverride None
Options ExecCGI
AddHandler cgi-script .cgi .pl
Order allow,deny
Allow from all
</Directory></nowiki>
restart apache

<nowiki>[~] # /etc/init.d/Qthttpd.sh restart</nowiki>
== Check ipkg ==
look for your ipkg version

<nowiki>[~] # ipkg --version</nowiki>
the system will reply with the present ipkg version

ipkg version 0.99.163

[~] #

== Check for ipkg Updates ==
update ipkg

<nowiki>[~] # ipkg update</nowiki>
The system will respond with something like

Downloading [http://ipkg.nslu2-linux.org/feeds/optware/tsx19/cross/unstable/Packages http://ipkg.nslu2-linux.org/feeds/optware/tsx19/cross/unstable/Packages]

Updated list of available packages in /opt/lib/ipkg/lists/tsx19

Downloading [http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable/Packages.gz http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable/Packages.gz]

Inflating [http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable/Packages.gz http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable/Packages.gz]

Updated list of available packages in /opt/lib/ipkg/lists/cs08q1armel

Successfully terminated.

[~] #

== Perl 5.10.0 install ==
make and check .cpan directory in /opt/

<nowiki>?????</nowiki>
<nowiki>[~] # find / -name '.cpan'</nowiki>
The system will respond like

/share/MD0_DATA/.qpkg/Optware/.cpan

[~] #

link the directory

<nowiki>[~] # ln -s /opt/.cpan /root/.cpan</nowiki>
List the available modules

<nowiki>[~] # ipkg list |grep perl</nowiki>
Check the installed ipgk modules

<nowiki>[~] # ipkg list_installed</nowiki>
install perl

<nowiki>[~] # ipkg install perl automake autoconf libtool m4 binutils coreutils gcc</nowiki>
the install ends like

Configuring m4

Configuring make

Configuring perl

Successfully terminated.

[~] #

== Perl 5.10.0 modules install ==
The following Perl modules have to be loaded

<nowiki>[~] # ipkg install libgd</nowiki>
The Graphical module

<nowiki>[~] # ipkg install perl-gd</nowiki>
<nowiki>[~] # ipkg install perl-yaml-syck</nowiki>
The Serial communication module

<nowiki>[~] # ipkg install perl-device-serialport</nowiki>
add CPAN modules

<nowiki>[~] # perl -MCPAN -e '$ENV{FTP_PASSIVE} = 1; install GD::Text'</nowiki>
<nowiki>[~] # perl -MCPAN -e '$ENV{FTP_PASSIVE} = 1; install GD::Graph'</nowiki>
== GNU plot install ==
Install one of my favorite plot functions for 3d

<nowiki>[~] # ipkg install gnuplot</nowiki>
== Test perl file ==
Map your server to your pc as an new drive

create an cgi-bin in Qweb

copy gd_test1.pl to here

try [http://asmlonline.com/cgi-bin/samples/gd_test1.pl http://asmlonline.com/cgi-bin/samples/gd_test1.pl]

<nowiki>#!/opt/bin/perl -w
# Change above line to point to your perl binary if youb insist to have it elsware
# name: test1.pl
use CGI::Carp qw/fatalsToBrowser/;
use CGI ':standard';
use GD::Graph::bars;
use strict;

# Both the arrays should same number of entries.
my @data = (["Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug","Sep", "Oct", "Nov", "Dec"],
[23, 5, 2, 20, 11, 33, 7, 31, 77, 18, 65, 52]);
my $mygraph = GD::Graph::bars->new(500, 300);
$mygraph->set(
x_label => 'Month',
y_label => 'Number of Hits',
title => 'Number of Hits in Each Month in 2002',
)
or warn $mygraph->error;

my $myimage = $mygraph->plot(\@data) or die $mygraph->error;
print "Content-type: image/png\n\n";
print $myimage->png;</nowiki>
Dont forget to make the test file as executable

<nowiki>chmod 755 test1.pl</nowiki>
== Test email function ==
test additional if we can email an local file

locate the file eg in Qweb/cgi-bin/samples

Create an file testmail.txt

<nowiki># cat /share/MD0_DATA/Qweb/cgi-bin/samples/testmail.txt | sendmail -t</nowiki>
the data for the mail has to be copied in an file

<nowiki>Subject: Anytext you want to have as mailsubject
From: Asmlonline server
To: your-email@live.nl
1 !!! ONE EMPTY LINE AT THE BOTTOM - else the body will not be transmitted
2 Any text you want to transmit in the body of the mail.
3
4 !!! ONE EMPTY LINE AT THE BOTTOM - else the body will not be transmitted
5 Any text you want to transmit in the body of the mail.
6
7 !!! ONE EMPTY LINE AT THE BOTTOM - else the body will not be transmitted
8 Any text you want to transmit in the body of the mail.
9
1
2
3 !!! ONE EMPTY LINE AT THE BOTTOM - else the body will not be transmitted
4 any text you want to transmit in the body of the mail.
5 !!! ONE EMPTY LINE AT THE BOTTOM - else the body will not be transmitted
6 Any text you want to transmit in the body of the mail.
7 !!! Footer.... need to be here and will not be send !!!!!
8</nowiki>
== Install of the 2302 Prolific Technology driver on a QNAP 219 ==
=== Start Putty ===
<nowiki>input here the putty stuff</nowiki>
=== Check kernel ===
<nowiki>[~] # Type: uname -a</nowiki>
Check the actual kernel version of the Qnap
in our example the following line is displayed

[~] '''Responce:'''Linux Faservtaiwan 2.6.22.18 #1 Thu Apr 30 21:30:06 CST 2009 armv5tejl unknown

<nowiki>The Qnap name is:Faservtaiwan
The actual Kernel version is : 2.6.22.18</nowiki>
=== Double check the USB interfaces on the QNAP ===
<nowiki>[~] # Type: lsusb</nowiki>
Check if you see the hardware if it is connected at the front

The system will reply with EG:

[~] '''Responce:'''Bus 001 Device 003: ID 067b: 2303 Prolific Technology, Inc.. Pl2303 Serial Port

[~] '''Responce:'''Device 002: ID 058f: 6254 Alcor Micro Corp.

[~] '''Responce:'''Device 001: ID 0000:0000

<nowiki>One of the issues of the 2303 driver, is that LINUX unfortunally does not like to recognize
the device at once, and needs some extra help.
If you dont see the top line with 2303 Prolific , please remove the USB connector from the QNAP
and replug it after 5 seconds. This will do the job</nowiki>
=== to do ===
<nowiki>Install Optware in Server web page Tab by selecting QPKG-Plugins >> Optware.ipkg</nowiki>
[~] # Type: dmesg | grep tty
[~] # Type: dmesg | grep usb

=== Check the actual driver status ===
<nowiki>[~] # Type: cat /proc/bus/usb/devices</nowiki>
The responce of the sysem will be something like this

T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=067b ProdID=2303 Rev= 3.00
S: Manufacturer=Prolific Technology Inc.
S: Product=USB-Serial Controller
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=none
E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

The Driver=none indicates that there is no driver attached

# <nowiki>!/bin/sh </nowiki>

ln -s /opt/lib/modules/2.6.12.6-arm1/kernel /lib/modules
insmod /lib/modules/kernel/drivers/usb/serial/usbserial.ko vendor=0x03eb product=0x204b
insmod /lib/modules/kernel/drivers/usb/serial/ftdi_sio.ko
insmod /lib/modules/kernel/drivers/usb/serial/pl2303.ko

[~] # Type: ipkg update
[~] # Type: ipkg list | grep usb
[~] # Type: ipkg install kernel-module-usbserial
[~] # Type: cd /opt/lib/modules/2.6.22.18/kernel/drivers/usb/serial
[~] # Type: ll
[~] # type: insmod usbserial.ko
[~] # Type: ipkg list | grep pl23
[~] # Type: ipkg install kernel-module-pl2303
[~] # Type: cd /opt/lib/modules/2.6.22.18/kernel/drivers/usb/serial
[~] # Type: ll
[~] # type: insmod pl2303.ko

=== Check the actual driver is attached ===
<nowiki>[~] # Type: cat /proc/bus/usb/devices</nowiki>
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=067b ProdID=2303 Rev= 3.00
S: Manufacturer=Prolific Technology Inc.
S: Product=USB-Serial Controller
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=pl2303
E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms.,
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

The Driver=pl2303 indicates that there is an driver attached

[~] # Type: lsmod
[~] # Type: dmesg | grep pl2303
</pre>

=== Check the driver ===
<nowiki>[~] # Type: ls -al /dev/usb/ttyUSB*</nowiki>
= Reboot und Test =
Much Fun

Jan 05.02.2010

www.asmlonline.com >> asmlonline@hotmail.com

Qnap: clean install - Versionsgeschichte

Markusbloch: /* Firmware upgrade */

Markusbloch: /* Check the actual driver is attached */

Markusbloch: /* Check the actual driver is attached */

Markusbloch: /* Check the actual driver status */

Markusbloch: /* Reboot und Test */

Generix: Die Seite wurde neu angelegt: „Cleanup Qnap This is an simple sequence for starting all over with an qnap TS-219 after having played with an TS-219 for some time. In this time we have probl…“